Hydraulic Auto Lift

Product Types: Hydraulic Car Lift System Car Size • Max Length (mm): 5300 • Max Width (mm): 2050 • Height (mm): 1550 • Max Weight (kg): 2350 Lifting Speed: 0-20m/min Control Method: Button/IC Card

Send Inquiry

Product Introduction

The Hydraulic Auto Lift integrates a fail-safe hydraulic lock valve in its hydraulic circuit. This valve is critical during emergencies like sudden power loss or hydraulic line failure.

If power is lost or a pipeline ruptures, which could cause uncontrolled platform descent, the hydraulic lock valve will activates instantly. It seals the hydraulic oil flow. By locking the oil line, it stops the platform from dropping. This protects operators and equipment below. This feature uses hydraulic pressure physics to reduce risk, not relying on external parts that might fail.

Stable system pressure is vital for smooth operation and safety. This lift uses advanced pressure regulation to keep consistent hydraulic pressure. This ensures smooth lifting and lowering and extends component life by avoiding pressure spikes.

The Hydraulic Auto Lift also has reliable overload protection. If the load exceeds the maximum capacity, the system will detect it immediately. It either stops further lift action or triggers an alert. This prevents mechanical strain, part failures, and accidents from overloading.

Besides the hydraulic lock valve, other redundancies improve safety. The design allows easy addition of mechanical safety hooks. These hooks act as secondary, physical securing mechanisms if the primary hydraulic system fails.

As a mechanical backup, safety hooks provide extra assurance and meet strict safety standards. This fail-safe approach creates multiple protection layers, hydraulic locks first, mechanical hooks second, making a strong safety net to prevent accidents.

This lift offers more than just moving heavy loads. It provides a full safety solution to protect operators, equipment, and workflows. There are some advantages :

1. Intrinsic fall prevention via hydraulic lock valves that block fluid flow in emergencies.

2. Stable system pressure with precise overload protection for smooth, reliable operation.

3. Easy addition of mechanical safety hooks for extra physical protection.

4. These multi-tiered safety features make this lift a top choice for companies prioritizing workplace safety and efficiency.

Technical Specifications

Product Types		The Hydraulic Auto Lift
Car Size	Max Length (mm)	5300
	Max Width (mm)	2050
	Height (mm)	1550
	Max Weight (kg)	2350
Capacity		1 vehicle per cycle
Lifting Motor Power		7.5-15Kw
Lifting Speed		0-20m/min
Maximum In-Out Time		46s
Maximum Working Pressure		7MPa
Drive Method		Hydraulic-driven, Chain or Wire Rope Lifting
Control Method		Button/IC Card
Power Supply		Three-phase 380V 50Hz